Skip to content
Office cafe commons with grey vinyl tile and a carpeted lounge, the hard and soft floors San Ramon floor care looks after

San Ramon Cleaning

San Ramon Commercial Floor Care

We maintain San Ramon commercial hard floors with strip-and-refinish, scrubbing, recoating, burnishing and polishing, along with concrete scrubbing and marble and terrazzo care. Each process serves a different purpose and is matched to the flooring and its existing finish.

Request a quoteCall (925) 320-6437

Cleaning the hard surface

Scrubbing is the deep clean for vinyl tile, bare concrete and stone, set up for each floor’s material and condition instead of one treatment for the whole building.

Maintaining the existing finish

When a finish looks dull, polishing or burnishing brings the shine back. When traffic has worn it thin, a recoat lays down a fresh layer.

Periodic maintenance and daily care

Routine visits sweep and mop away everyday dirt. Scrubbing, recoating and burnishing are booked as their own visits on a cycle set by traffic, so a busy lobby comes up more often than a quiet back room.

Matching the process to the floor

Hard floors in a busy building do not wear evenly. Entrances and heavily used rooms usually need attention sooner than quiet ones, so we look at each area and choose between a full strip and refinish, scrubbing, recoating, polishing and burnishing based on what that floor needs.

Periodic work is planned for a time when the area can be left to dry or cure before people return. Schools and stores use this service between routine visits; see school cleaning or retail cleaning for how floors fit into the wider plan.

What each hard floor process does

Stripping and refinishing takes worn, yellowed wax off vinyl composition tile down to the bare floor and lays down fresh coats of finish, the deepest reset a finished floor can get. Scrubbing lifts the soil ground into a hard floor that daily cleaning leaves behind. Recoating lays fresh finish over the existing layer once traffic has worn it thin. Polishing and burnishing bring back the gloss on a finished floor between deeper treatments, so the surface keeps its look between strips.

Over time, a floor usually needs a combination rather than one process. A lobby that dulls each week is burnished on a short cycle, scrubbed when soil builds up, and recoated when the finish wears through in the traffic lanes. We sequence the work so each step sets up the next instead of undoing it.

Concrete scrubbing, marble and terrazzo

Bare concrete in warehouse aisles, loading areas and back corridors gets machine scrubbing with a cleaner suited to the slab. Tire marks, grit and the grime a mop only spreads around come up, and the floor is left clean and dry for the next shift.

Marble and terrazzo lobbies get stone-safe cleaners that will not etch the surface, then periodic polishing that brings back their natural shine. That polishing is booked for an evening or weekend, so the entry looks its best when visitors arrive.

Ceramic tile and grout floors

Ceramic and porcelain tile in lobbies, breakrooms, restrooms and kitchens wears well on the surface, but the grout between the tiles is porous and darkens first along the traffic path. Our crews machine-scrub the tile field and the grout lines with a cleaner suited to the surface, then extract or auto-scrub the loosened soil so it leaves the floor instead of settling back into the joints.

Busy entrances and breakrooms are scrubbed on a short cycle and quieter rooms less often, with each visit booked for an evening or weekend. Restroom floors get the same grout scrub as part of restroom deep cleaning.

Hard floors in San Ramon offices, stores and schools

Office lobbies and entrances take the most foot traffic in the building, and their hard floors show it first. Retail selling floors carry customers all day and have to look bright at opening. School corridors and entrances collect grit from every student who walks in.

Each of these gets its own cadence. Lobbies and selling floors are burnished more often to hold their shine, while school floors are scheduled for deeper work during breaks, when rooms stay empty longer. Retail cleaning and routine janitorial visits handle the daily dirt in between treatments. Staff corridors in warehouses and the waiting rooms of medical offices follow the same rule: the busiest floor gets the shortest cycle.

Preparing for a floor care visit

Tell us the flooring material in each area, such as vinyl tile, bare concrete, marble or terrazzo, and whether it carries a finish. Note which areas take the heaviest traffic and when each one closes long enough for the floor to dry or cure. Include all of it when you request a quote.

Periodic floor work is booked as its own visit, separate from routine cleaning, so a scrub and recoat never crowds the regular task list. When the building also has carpeted rooms, carpet extraction fits into the same quiet window, and one closure covers both.

San Ramon floor care: the cost per square foot

We price floor work per square foot, with a minimum charge for small jobs. A full strip and refinish of vinyl tile in San Ramon usually costs $0.47 to $1.00 a square foot: big open floors in fair shape start near $0.36, and small rooms with thick buildup or special finishes reach $3.00. A scrub and recoat, which renews a sound finish between strips, runs $0.21 to $0.42, and small rooms crowded with furniture or heavy wear reach about $0.62. Both bands follow published 2026 floor-care pricing.

Example: a breakroom and lobby with 1,900 square feet of tile. Scrubbed and recoated at $0.40 a square foot, the job costs $760. Stripped to bare tile and refinished at $0.95, the same area costs $1,805. Both rates sit high in their bands because the area is small and full of tables and chairs. A 9,000-square-foot corridor run, done in one visit, prices well below that.

Material, finish and wear set most of the price, furniture and edges add hand work, and a strip also depends on how many old coats come up. Traffic sets how often you need the work. A fresh coat needs time to cure, so we schedule the visit when the floor can rest. Burnishing on its own is priced per visit. Concrete scrubbing and marble or terrazzo care are priced on the floor itself: its size, how much soil is ground in and how often it needs the work. Schools, stores, offices and every property type we clean wear floors at their own pace. The cost guide lists floor care beside the other services, and we look at the floors with you before we quote.

Common questions

What determines the maintenance interval?

Traffic, mostly. Entrances and lobbies need work more often than quiet rooms, and the floor’s material and finish set which process comes next.

What affects when a treated floor returns to use?

A scrub or burnish is ready soon after the crew packs up. A recoat needs more time to cure, so we book it for an evening or weekend and the floor is ready when people return.

Which hard floor processes do you offer?

Strip-and-refinish, scrubbing, recoating, polishing and burnishing for finished floors, machine scrubbing for bare concrete, and cleaning and polishing for marble and terrazzo.

Do you offer commercial floor cleaning services in San Ramon?

Yes. We strip and refinish, scrub, recoat, polish and burnish hard floors in San Ramon offices, stores, schools, warehouses and medical buildings.

Should a dull lobby floor be burnished or recoated?

Burnish when the finish is intact but has lost its gloss. Recoat when traffic has worn the finish thin and a new layer is needed.

Is floor care done outside business hours?

Yes. Periodic floor work is booked for evenings or weekends so the floor has time to dry or cure before anyone walks on it.

Can worn wax on our VCT be stripped and redone?

Yes. We strip worn wax from vinyl composition tile down to the bare floor and lay fresh coats of finish, usually overnight or over a weekend so it can cure before traffic returns.

Can you clean and polish marble or terrazzo?

Yes. Stone floors get stone-safe cleaning and periodic polishing that brings back their shine without dulling the surface.